Example - Configuring DID to ring some Device

From Kolmisoft Wiki
Revision as of 03:36, 16 May 2010 by Admin (talk | contribs) (→‎Plan)
Jump to navigationJump to search

Primary situation

We have:

  • DID - an external number (02180995165) provided by a Provider.
  • The number is from the UK.
  • The connection to the provider is via IAX2, IP: 23.45.67.89:4569.
  • Devices SIP/201 and SIP/202.

We want:

  • To dial the DID 02180995165 using our mobile phone and ring Device SIP/201.

Dstrd1-1.png

  • To dial the DID 02180995165 using the local Device SIP/202 in order to ring Device SIP/201 (local SIP-SIP call not going to PSTN).

Dstrd1-2.png

Configuration

Plan

  1. Configure Localization for Provider.
  2. Create Provider.
  3. Register Provider.
  4. Create Devices SIP/201 and SIP/202.
  5. Create/Configure DID.

Configure Localization for Provider

As DID is not in E164 format, we must configure MOR to handle that.

That means that DID from provider comes in non-E164 format: 02180995165

We must create Location for this provider and add rule to it.

We create Location: UK and add rule to convert non-E164 DID to E164 DID: 02180995165 -> 4402180995165

Dsfd3.png


Create Provider

Create Provider in MOR GUI.

Do not forget to set Location: UK for this Provider.

Register Provider

IF your Provider asks you to register, register it - do it.

Create Devices SIP/201 and SIP/202

Create Devices as usual (no need to edit any of .conf files!!!)

DO NOT forget to set Location: UK for these Devices.



Create/Configure DID

Create DID in E164 format

Dsfd4.png

Reserve this DID to your User

Dsfd5.png

Assign DID to Device SIP/201

Dsfd6.png


That's it.