Conference with MOR + Trixbox

From Kolmisoft Wiki
Revision as of 11:48, 26 May 2010 by Admin (talk | contribs)
Jump to navigationJump to search

IT IS NOT POSSIBLE RUN CONFERENCE ONLY WITH MOR, YOU NEED EXTERNAL SOFTWARE, LIKE TRIXBOX

Tested with 0.7, 0.8 MORs and 2.6.2.3 trixbox.


Settings for MOR

First of all you need a user and device in MOR for a DID channel. Make sure you use IP authentication and use the exact settings in the image below (change 192.168.0.165 to Trixbox's IP address, and Trunk? should be set to Yes).

Device2.png

Create a DID and map it to the device.

Didmap.png

Settings for Trixbox

Log in as administrator to Trixbox and create a Trunk with the following settings: Change 192.168.0.148 to your MOR server IP address and 1005 username and secret to the appropriate settings.

Trixboxtrunk.png

Create a Conference with these settings:

Conference.png

Then create a DID (Inbound route):

DID1.png DID2.png

Then try to call from any device to 8000 in MOR. You should hear a woman's voice and instructions on what you need to do.

Of course, if you change settings everywhere from 8000 to your real DID, it will work as well.