Centos installation

From Kolmisoft Wiki
Revision as of 10:34, 22 January 2010 by Admin (talk | contribs)
Jump to navigationJump to search

In order to install MOR you need Centos 5.2+ system (Install current version Centos 5.4).

First of all you need to download install image. Decide which architecture you need: i386 or x86_64 and download only 1st CD out of 6(7). Because only first CD is necessary to install base system.

Centos can be downloaded from here: http://mirror.centos.org/centos/5/isos/

As an example for i386 you should download file CentOS-5.4-i386-bin-1of6.iso

And for x86_64 file CentOS-5.4-x86_64-bin-1of7.iso

Make sure file IS NOT LiveCD and extension is ISO, but not .torrent!

After you burn and boot from this CD, you will see:

Centos install 1.png

Press ENTER here to go to GRAPHICAL MODE (in text mode it is not possible to deselect all the packets).


After that you will be asked to test install CD - let's skip this part to save time:

Centos install 2.png


On main Centos window press NEXT:

Centos install 3.png


Select your installation language:

Centos install 4.png


And keyboard layout:

Centos install 5.png


Then your system asks you to reformat your HDD, make sure you know what you are doing and press YES:

Centos install 6.png


Then installer asks if new HDD layout is ok - you can change it if you know what you are doing - we recommend to leave it as it is, press NEXT:

Centos install 7.png


In next window confirm your step by pressing YES:

Centos install 8.png


Following window lets you select network configuration, enter manual details or leave DHCP (manual is recommended):

Centos install 9.png


Select your time-zone:

Centos install 10.png


Enter root password:

Centos install 11.png


This step is VERY IMPORTANT! Make sure you unchecked EVERYTHING from package selection, and CHECK "Customize now", press NEXT:

Centos install 12.png


This step is also VERY IMPORTANT! Make sure you unchecked EVERYTHING again and in ALL categories! Nothing should be left selected - otherwise installed will ask you for other install CDs. When done press NEXT:

Centos install 13.png


Then you will see final window after which installation begins (press NEXT):

Centos install 14.png


Troubleshooting

If installation is asking you for CD #2, #3, #4 or anything else - that means you failed to UNSELECT all packets as was pointed out before.

Solution:

  1. Read manual carefully once again
  2. Do as it says EXACTLY (unselect ALL packets)
  3. Reinstall