M4 Active Calls

From Kolmisoft Wiki
Revision as of 07:58, 9 June 2022 by Gilbertas (talk | contribs)
Jump to navigationJump to search

Description

In the Quick Stats on the start window it is possible to see the Active Calls. These are the Calls that are in the system at the moment. Using the Admin menu Active Calls can be found at REPORTS -> Active Calls.

M2 active calls admin navigation.png

By clicking on the menu link or on the Active Calls section in the Quick Stats, you will be forwarded to the Active Calls page.

M2 activecalls full.png

In this window, all Active Calls are presented in more detail, such as Start time, Duration, Source, and Destination. Table data has links to Users, Servers, or Devices. Also, each Call is indicated as Answered or Ringing.
NOTE: In order to see the correct duration on Multi-Server systems, the time should be synchronized on all of the Servers. Press Play to Start page refreshment, press Pause to stop page refreshment.

The Active Calls window also provides a sophisticated search filter. It can be expanded by clicking on the REFINE RESULTS button. You can fill the search fields with intended values and click the REFINE button. The Active Calls table will readjust and show only the Calls which satisfy the search filter.

In addition, it is possible to reset the statistic by clicking the RESET ACTIVE CALLS INFORMATION button. As the text next to it says, this action will not affect your Calls in any way.

HANGUP ALL CALLS will hangup all Active Calls selected by Search filter.

Active calls also show information if calls are made to DID numbers. Here is the example of Active Call window when call to DID is active.

M2 active list DID.png

Active Calls settings

On the system settings window (MAINTENANCE -> Settings) in the ACTIVE CALLS section several settings can be adjusted:

M2 Active Calls settings.png

  • How many maximum Active Calls to show in GUI. Determines how many Active Calls should be displayed in the Active Calls window. If there are more Calls than this setting allows, Active Calls table will not show any of them, instead, the Too much calls to show warning will appear.
  • Active Calls refresh interval. Determines how often (in seconds) the Active Calls information is refreshed.
  • Show Active Calls for Users. Allows Users to see their Active Calls.
  • Show Servers in Active Calls. Determines whether Server information should be included in the Active Calls window.
  • Show Rates in Active Calls. Determines whether call Rates should be included in the Active Calls window.

Hangup an Active Call

To hang up an Active Call, click the Icon delete.png (delete) icon next to it. The system will try to hang the Call up. If the Call is still visible, it means that Asterisk can't hang up the Call. It has stuck. Stuck Calls are cleared every two hours. There's no need to do anything further.

Active Calls for Users

After having enabled the Show Active Calls for Users setting, Users can access their Active Calls statistics. It can be done by opening the CALLS -> Active Calls window from the User personal menu.

M2 active calls user navigation.png