Difference between revisions of "Setting up https secure connection"

From Kolmisoft Wiki
Jump to navigationJump to search
Line 314: Line 314:
                                                           [FAILED]
                                                           [FAILED]
Check if SElinux is disabled.
Check if SElinux is disabled.
To disable it, check this [ http://wiki.kolmisoft.com/index.php/Selinux | mnual]
To disable it, check this [http://wiki.kolmisoft.com/index.php/Selinux|manual]





Revision as of 13:22, 22 February 2019

Installing SSL

For an SSL encrypted web server you will need a few things. Depending on your install you may or may not have OpenSSL and mod_ssl, Apache's interface to OpenSSL.

yum -y install mod_ssl openssl 

Generate private key

openssl genrsa -out ca.key 2048 

Generate CSR

openssl req -new -key ca.key -out ca.csr

Generate Self Signed Key

openssl x509 -req -days 365 -in ca.csr -signkey ca.key -out ca.crt

Move the files to the correct locations

mv ca.crt /etc/pki/tls/certs
mv ca.key /etc/pki/tls/private/ca.key
mv ca.csr /etc/pki/tls/private/ca.csr

Then we need to update the Apache SSL configuration file ( /etc/httpd/conf.d/ssl.conf ). Change the paths to match where the Key file is stored. If you've used the method above it will be.

SSLCertificateFile /etc/pki/tls/certs/ca.crt  

Then set the correct path for the Certificate Key File a few lines below. If you've followed the instructions above it is:

SSLCertificateKeyFile /etc/pki/tls/private/ca.key  

Quit and save the file and then restart Apache

/etc/init.d/httpd restart

Source: http://shapeshed.com/journal/setting_up_mod_ssl_on_apache_centos_52/

Troubleshooting:

If you cannot access GUI, try following commands:

chown -R apache:apache /var/log/httpd
service httpd restart

Allow only https

If you would like your users to be automatically redirected to secure connection (https), add the line to /etc/httpd/conf.d/mor.conf so it would look like:

<VirtualHost *:80>
 DocumentRoot /var/www/html
 <Directory /var/www/html>
  Allow from all
 </Directory>
 RailsBaseURI /billing
 <Directory /var/www/html/billing>
  Options -MultiViews
 </Directory>
 RailsEnv production
 Redirect permanent / https://www.example.com/     #Add this one. Put your hostname instead of www.example.com
</VirtualHost>



Important notes

  • When you disable http access and allow https only - please make sure that you change URL in various crontabs used by mor and located in /etc/cron.d/*




ERROR: When directory structure is visible

That means incorrect configuration in /etc/httpd/conf.d/ssl.conf

Make sure your file looks like this:

#
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.
#
 
LoadModule ssl_module modules/mod_ssl.so
 
#
# When we also provide SSL we have to listen to the
# the HTTPS port in addition.
#
Listen 443
 
##
##  SSL Global Context
##
##  All SSL configuration in this context applies both to
##  the main server and all SSL-enabled virtual hosts.
##
 
#   Pass Phrase Dialog:
#   Configure the pass phrase gathering process.
#   The filtering dialog program (`builtin' is a internal
#   terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog  builtin
 
#   Inter-Process Session Cache:
#   Configure the SSL Session Cache: First the mechanism
#   to use and second the expiring timeout (in seconds).
SSLSessionCache         shmcb:/var/cache/mod_ssl/scache(512000)
SSLSessionCacheTimeout  300
 
#   Semaphore:
#   Configure the path to the mutual exclusion semaphore the
#   SSL engine uses internally for inter-process synchronization.
SSLMutex default
 
#   Pseudo Random Number Generator (PRNG):
#   Configure one or more sources to seed the PRNG of the
#   SSL library. The seed data should be of good random quality.
#   WARNING! On some platforms /dev/random blocks if not enough entropy
#   is available. This means you then cannot use the /dev/random device
#   because it would lead to very long connection times (as long as
#   it requires to make more entropy available). But usually those
#   platforms additionally provide a /dev/urandom device which doesn't
#   block. So, if available, use this one instead. Read the mod_ssl User
#   Manual for more details.
SSLRandomSeed startup file:/dev/urandom  256
SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random  512
#SSLRandomSeed connect file:/dev/random  512
#SSLRandomSeed connect file:/dev/urandom 512
 
#
# Use "SSLCryptoDevice" to enable any supported hardware
# accelerators. Use "openssl engine -v" to list supported
# engine names.  NOTE: If you enable an accelerator and the
# server does not start, consult the error logs and ensure
# your accelerator is functioning properly.
#
SSLCryptoDevice builtin
#SSLCryptoDevice ubsec
 
##
## SSL Virtual Host Context
##
 
<VirtualHost _default_:443>
 
# General setup for the virtual host, inherited from global configuration
DocumentRoot "/var/www/html/billing"                                           #ADD THIS
#ServerName www.example.com:443
 
# Use separate log files for the SSL virtual host; note that LogLevel
# is not inherited from httpd.conf.
ErrorLog logs/ssl_error_log
TransferLog logs/ssl_access_log
LogLevel warn
 
#   SSL Engine Switch:
#   Enable/Disable SSL for this virtual host.
SSLEngine on
 
#   SSL Protocol support:
# List the enable protocol levels with which clients will be able to
# connect.  Disable SSLv2 access by default:
SSLProtocol all -SSLv2
 
#   SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite ALL:!ADH:!EXPORT:!SSLv2:RC4+RSA:+HIGH:+MEDIUM:+LOW
 
#   Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate.  If
# the certificate is encrypted, then you will be prompted for a
# pass phrase.  Note that a kill -HUP will prompt again.  A new
# certificate can be generated using the genkey(1) command.
SSLCertificateFile /etc/pki/tls/certs/ca.crt
 
#   Server Private Key:
#   If the key is not combined with the certificate, use this
#   directive to point at the key file.  Keep in mind that if
#   you've both a RSA and a DSA private key you can configure
#   both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/pki/tls/private/ca.key
 
#   Server Certificate Chain:
#   Point SSLCertificateChainFile at a file containing the
#   concatenation of PEM encoded CA certificates which form the
#   certificate chain for the server certificate. Alternatively
#   the referenced file can be the same as SSLCertificateFile
#   when the CA certificates are directly appended to the server
#   certificate for convinience.
#SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
 
#   Certificate Authority (CA):
#   Set the CA certificate verification path where to find CA
#   certificates for client authentication or alternatively one
#   huge file containing all of them (file must be PEM encoded)
#SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt
 
#   Client Authentication (Type):
#   Client certificate verification type and depth.  Types are
#   none, optional, require and optional_no_ca.  Depth is a
#   number which specifies how deeply to verify the certificate
#   issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth  10
 
#   Access Control:
#   With SSLRequire you can do per-directory access control based
#   on arbitrary complex boolean expressions containing server
#   variable checks and other lookup directives.  The syntax is a
#   mixture between C and Perl.  See the mod_ssl documentation
#   for more details.
#<Location />
#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20       ) \
#           or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
 
#   SSL Engine Options:
#   Set various options for the SSL engine.
#   o FakeBasicAuth:
#     Translate the client X.509 into a Basic Authorisation.  This means that
#     the standard Auth/DBMAuth methods can be used for access control.  The
#     user name is the `one line' version of the client's X.509 certificate.
#     Note that no password is obtained from the user. Every entry in the user
#     file needs this password: `xxj31ZMTZzkVA'.
#   o ExportCertData:
#     This exports two additional environment variables: SSL_CLIENT_CERT and
#     SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
#     server (always existing) and the client (only existing when client
#     authentication is used). This can be used to import the certificates
#     into CGI scripts.
#   o StdEnvVars:
#     This exports the standard SSL/TLS related `SSL_*' environment variables.
#     Per default this exportation is switched off for performance reasons,
#     because the extraction step is an expensive operation and is usually
#     useless for serving static content. So one usually enables the
#     exportation for CGI and SSI requests only.
#   o StrictRequire:
#     This denies access when "SSLRequireSSL" or "SSLRequire" applied even
#     under a "Satisfy any" situation, i.e. when it applies access is denied
#     and no other module can change it.
#   o OptRenegotiate:
#     This enables optimized SSL connection renegotiation handling when SSL
#     directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
    SSLOptions +StdEnvVars
</Files>
<Directory "/var/www/cgi-bin">
    SSLOptions +StdEnvVars
</Directory>
 
#   SSL Protocol Adjustments:
#   The safe and default but still SSL/TLS standard compliant shutdown
#   approach is that mod_ssl sends the close notify alert but doesn't wait for
#   the close notify alert from client. When you need a different shutdown
#   approach you can use one of the following variables:
#   o ssl-unclean-shutdown:
#     This forces an unclean shutdown when the connection is closed, i.e. no
#     SSL close notify alert is send or allowed to received.  This violates
#     the SSL/TLS standard but is needed for some brain-dead browsers. Use
#     this when you receive I/O errors because of the standard approach where
#     mod_ssl sends the close notify alert.
#   o ssl-accurate-shutdown:
#     This forces an accurate shutdown when the connection is closed, i.e. a
#     SSL close notify alert is send and mod_ssl waits for the close notify
#     alert of the client. This is 100% SSL/TLS standard compliant, but in
#     practice often causes hanging connections with brain-dead browsers. Use
#     this only for browsers where you know that their SSL implementation
#     works correctly.
#   Notice: Most problems of broken clients are also related to the HTTP
#   keep-alive facility, so you usually additionally want to disable
#   keep-alive for those clients, too. Use variable "nokeepalive" for this.
#   Similarly, one has to force some clients to use HTTP/1.0 to workaround
#   their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
#   "force-response-1.0" for this.
SetEnvIf User-Agent ".*MSIE.*" \
         nokeepalive ssl-unclean-shutdown \
         downgrade-1.0 force-response-1.0
 
#   Per-Server Logging:
#   The home of a custom SSL log file. Use this when you want a
#   compact non-error SSL logfile on a virtual host basis.
CustomLog logs/ssl_request_log \
          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
 
DocumentRoot /var/www/html                                                #ADD THIS
<Directory /var/www/html>                                                 #ADD THIS
    Allow from all                                                        #ADD THIS
</Directory>                                                              #ADD THIS
RailsBaseURI /billing                                                     #ADD THIS
<Directory /var/www/html/billing>                                         #ADD THIS
    Options -MultiViews                                                   #ADD THIS
</Directory>                                                              #ADD THIS
ServerName my.domain.com                                                  #ADD THIS
RedirectMatch permanent ^/$ https://my.domain.com/billing/callc/login     #ADD THIS change my.domain.com to proper domain
 
</VirtualHost>

If you are implementing SSL into MOR please remove m2.conf file

rm -rf /etc/httpd/conf.d/m2.conf

Restart Apache after changing this file.

ERROR: When service httpd fails to restart

service httpd restart
Stopping httpd:                                            [  OK  ]
Starting httpd: Syntax error on line 112 of /etc/httpd/conf.d/ssl.conf:
SSLCertificateKeyFile: file '/etc/pki/tls/private/ca.key' does not exist or is empty
                                                          [FAILED]

Check if SElinux is disabled. To disable it, check this [1]


Once SSL setups is completed, ensure that hourly actions are able to access GUI internally:

wget http://127.0.0.1/billing/callc/hourly_actions

if it does not work, adjust domain or add --no-check-certificate.

Once command works, make same adjustments on /etc/cron.d/mor_hourly_actions, mor_daily_actions and mor_monthly_actions.

!!!DO NOT TEST RUN daily AND monthly ACTIONS MANUALLY!!! just adjust cron files, save then and restart crond service.