M2 Hangupcause Codes
From Kolmisoft Wiki
Jump to navigationJump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Code | Explanation |
300 | Not authenticated (accountcode = 0) |
301 | Originator not found by IP address |
302 | Global Call Limit reached |
303 | Originator Capacity reached |
304 | Originator's CPS Limit reached |
305 | Source (CallerID) not accepted by regexp |
306 | Originator Balance Limit reached (Balance Min) |
307 | Originator Rate not found |
308 | Dial Peer not found |
309 | Origination Point is not active |
310 | Suitable Terminator not found |
311 | User is blocked |
312 | Caller canceled the call (Freeswitch HGC ORIGINATOR_CANCEL 487) |
313 | User call limit reached |
314 | M2 radius server did not receive accounting start packet (acct start timeout) |
315 | M2 radius server did not receive accounting stop packet (acct stop timeout) |
316 | Freeswitch did not find termination point details |
317 | Registration to termination point failed |
318 | Originator codecs are not allowed |
319 | M2 can not make more calls |
320 | Balance too low to make a call |
321 | Caller's source number (CallerID) does not match terminator's source regexp |
322 | Caller's source number (CallerID) is denied by terminator's source deny regexp |
323 | Terminator's balance limit reached (balance max) |
324 | Rate margin is lower than allowed |
325 | Destination number is in blacklist |
326 | Destination number is not in the whitelist |
327 | Terminator's capacity reached |
328 | Terminator's user's call limit reached |
329 | Terminator's CPS limit reached |
330 | Destination is blocked in Originator's Tariff |
331 | Destination is blocked in Terminator's Tariff |
332 | Originator was found by IP but tech prefix does not match |
333 | Originator was found by IP but the port does not match |
334 | Source number is in blacklist |
335 | Source number is not in the whitelist |
336 | Destination can not be empty |
337 | Call comes from the server which is not assigned to the originator |
338 | Unreachable Terminator skipped (Periodic Check is enabled) |
339 | User is not allowed to dial through own terminators |
340 | User's call rate is higher than allowed |
341 | Originator's IP is unknown |
342 | Global Incoming System CPS limit reached |
343 | Too many hops |
344 | Terminator reached call limit in a Dial Peer |
345 | Terminator reached CPS limit in a Dial Peer |
346 | Call terminated by hangup command |
347 | Duplicate CallID/UniqueID |
348 | MySQL query timeout |
349 | Vendor is blocked |
350 | MNP search error |
351 | MNP CIP does not match TP |
352 | User daily spend limit reached |
353 | LNP search error |
354 | CLI/ANI is not in whitelist |
355 | CLI/ANI is in blacklist |
356 | CLD/DNIS is not accepted by regexp |
357 | CLD/DNIS is not in whitelist |
358 | CLD/DNIS is denied by regexp |
359 | CLD/DNIS is in blacklist |
360 | FROM domain is not allowed |
361 | TO domain is not allowed |
362 | Terminator balance limit reached (balance min) |
363 | DID is not active |
364 | DID is not forwarded anywhere |
365 | DID CC limit reached |
366 | DID selling rate not found |
367 | DID buying rate not found |
368 | Balance too low to make a DID call |
369 | DID authorization error |
370 | Flat-Rate authorization error |
371 | TP rate is higher than allowed in Flat-Rate |
372 | DID subscription is not active |
373 | DID selling rate is blocked |
374 | DID buying rate is blocked |
375 | Duplicate Call |
376 | Source number not found in TP CLI Whitelist Number Pool |
377 | Source number found in TP CLI Blacklist Number Pool |
378 | Destination number does not match TP CLD Whitelist Regexp |
379 | Destination number not found in TP CLD Whitelist Number Pool |
380 | Destination number matches TP CLD Blacklist regexp |
381 | Destination number found in TP CLD Blacklist Number Pool |
All M2 HGC return SIP 503 by default.
This can be changed in /etc/m2/system.conf using
hgcX = code
Where X is M2 HGC, and code is ITU-T Q.850 Code and then execute the command:
m2 reload